NEW ELECTRONIC TIMED TANK DRAIN CONDENSATE VALVE FOR COMPRESSOR AIR TANK EDV-1
NEW ELECTRONIC TIMED TANK DRAIN CONDENSATE VALVE FOR COMPRESSOR AIR TANK EDV-1 NEW ELECTRONIC TIMED TANK DRAIN CONDENSATE VALVE FOR COMPRESSOR AIR TANK EDV-1 NEW ELECTRONIC TIMED TANK DRAIN CONDENSATE VALVE FOR COMPRESSOR AIR TANK EDV-1

NEW ELECTRONIC TIMED TANK DRAIN CONDENSATE VALVE FOR COMPRESSOR AIR TANK EDV-1

$44.59 USD

ELECTRONIC TANK MOISTURE DRAIN FOR AIR COMPRESSORS AND AIR TANKS

BRAND NEW 115 VOLT ELECTRONIC AUTOMATIC TIMER MOISTURE DRAIN FOR AIR COMPRESSORS AND AIR TANKS. THIS DRAIN CAN BE SET TO DRAIN EVERY 30 SECONDS UP TO EVERY 45 MINUTES AND THE VALVE WILL STAY OPEN FOR .5 SECONDS UP TO 10 SECONDS, THEY ARE MOST COMMONLY SET TO DRAIN FOR ABOUT 3 SECONDS EVERY 30 TO 45 MINUTES ON AIR COMPRESSOR APPLICATIONS, THIS VALVE ALSO HAS A TEST BUTTON TO DRAIN IT MANUALLY ANYTIME. THIS DRAIN PLUGS INTO A REGULAR 115 VOLT OUTLET AND THE CORD IS 6.5' LONG. THE VALVE HAS 1/2" MALE NPT AIR INLET WHICH MEASURES ABOUT 3/4" IN DIAMETER, A REDUCER CAN BE USED IF A SMALLER CONNECTION IS NEEDED. THE AIR OUTLET IS 1/2" FEMALE NPT WHICH ALSO CAN BE REDUCED IF NEEDED. THESE ARE NICE INDUSTRIAL QUALITY DRAINS, THAT HAVE A BUILT-IN STRAINER TO PROTECT THE VALVE FROM DEBRIS, WHICH CAN BE CLEANED IF IT GETS CLOGGED.

-MAX PRESSURE: 200 PSI

-OPERATING TEMPERATURE: 32 DEGREES F - 130 DEGREES F

-BRASS BODY CONSTRUCTION

-CAN BE MOUNTED IN ANY POSITION

-COMES WITH INSTRUCTIONS

Minder EDV Electronic Solenoid Valve

    • Features:

    • Built in strainer
    • 1/4 turn ball valve
    • Dual size inlet
    • Large 4mm internal orifice
    • Internal armature and shaft made from stainless steel
    • Unique Mounting system
    • Dual internal drain ports
    • Ball valve used as manual tank or filter drain
    • Solid state adjustable with test button
    • Valve design allows for disassembly

  •            Specifications:

    • Timer: Solid-state construction
    • Status Indication: Power "ON"
      Valve"OPEN"
    • Internal Time: 0.5 to 45 min. (as required)
    • Discharge Time: 0.5 to 10 sec. (as required)
    • Electrical Connection: DIN 46242
    • Connector: 4-position connector
    • Coil: 110/115 volt AC(standard)
      Available 12 volt/24 volt DC, 220/230 volt AC for overseas installations
    • Insulation: Class H 180°C (350°F)
    • Protection: IP65 including connector
      Conforms to NEMA 4 std.
    • Temperature Range: -20°C (-4F) to +150°C (300°F)
    • Standard Voltages: 220/240V, 50Hz 115V, 60Hz
    • Valve: 2-wy normally closed
    • Pressure Range: 0 to 16 bar (230 psi g
    • Temperature Range: Ambient: -10°C (14°F) to +50°C (120°F)
      Fluid: -10°C (14°F) to +140°C (285°F)
    • Lubrication: Not required
    • Strainer: Stainless steel screen ON/OFF control for self-cleaning
    • Media: Air, gases, water, oil etc.
    • Construction Materials: Tube/plunger - AISI 300/400 Spring - AISI 18/8
    • Body: Brass
    • Seal Material: Buna
    • Typical Installations: Compressor Source
      Receiver Outlet
      Filter Outlet

The Moisture Minder is an automatic drain valve for your compressor system.Requires electricity and allows for multiple mounting options, the Moisture Minder is a truly universal solution for any air system. Failure to routinely drain your compressed air system can have catastrophic results. Eliminate the need to get down on your knees to let the water out of your air compressor tanks by installing the Moisture Minder - Compressed Air Solutions.